Cup Face 360°
No face welds – the entire face is the sweet spot. Every shot feels like dead center.It may only be a few millimeters on the face, but hitting the ball off-center instead of direct-center usually means chipping instead of putting. Cup Face 360° technology makes the entire beta-titanium face a sweet spot. The 3-D plasma welding is completely off the face, enabling maximum rebound properties over a larger hitting area. It’s a sweet spot that is 30% larger than normal insert technology. So every shot feels like you hit it dead center. And the edge of the face can put you a long way down the middle.
Beta-Titanium Crown Insert
Lowers CG dramatically. Very low spin. Optimal launch.Alpha, alpha-beta and beta: Like the three grades of gasoline, there are three grades of titanium. Beta-titanium is high-octane supreme. MacGregor uses 15-3-3-3 beta-titanium to fashion an incredibly thin (.4mm) and light crown insert. This is 60% less mass than a standard titanium crown (1mm) and allows MacGregor to redistribute extra weight to the sole. This dramatically lowers the CG by 12% and helps achieve the ultimate in driver design: ultra-low spin combined with an optimal launch angle. Think long in the air and even longer once the ball lands. Yes, beta-titanium is expensive, but better materials always are.

MacGregor MACTEC NVG2 Tour Driver : (Right Handed) Features:
- Cup Face 360°
- Beta-Titanium Crown Insert













