MacGregor Mens MacTec NVG 2 Ti Drivers
Cup Face 360°
No face welds - the entire face is the sweet spot. Every shot feels like dead center.It may only be a few millimeters on the face, but hitting the ball off-center instead of direct-center usually means chipping instead of putting. Cup Face 360° technology makes the entire beta-titanium face a sweet spot. The 3-D plasma welding is completely off the face, enabling maximum rebound properties over a larger hitting area. It’s a sweet spot that is 30% larger than normal insert technology. So every shot feels like you hit it dead center. And the edge of the face can put you a long way down the middle.
Beta-Titanium Crown Insert
Lowers CG dramatically. Very low spin. Optimal launch.Alpha, alpha-beta and beta: Like the three grades of gasoline, there are three grades of titanium. Beta-titanium is high-octane supreme. MacGregor uses 15-3-3-3 beta-titanium to fashion an incredibly thin (.4mm) and light crown insert. This is 60% less mass than a standard titanium crown (1mm) and allows MacGregor to redistribute extra weight to the sole. This dramatically lowers the CG by 12% and helps achieve the ultimate in driver design: ultra-low spin combined with an optimal launch angle. Think long in the air and even longer once the ball lands. Yes, beta-titanium is expensive, but better materials always are.
MacGregor MACTEC NVG2 445cc Driver with Graphite Shaft Cup Face 360° No face welds - the entire face is the sweet spot. Every shot feels like dead center. It may only be a few millimeters on the face, but hitting the ball off-center instead of direct-center usually means chipping instead of putting. Cup Face 360° technology makes the entire beta-titanium face a sweet spot. The 3-D plasma welding is completely off the face, enabling maximum rebound properties over a larger hitting area. It’s a sweet spot that is 30% larger than normal insert technology. So every shot feels like you hit it dead center. And the edge of the face can put you a long way down the middle. Beta-Titanium Face High rebound. Hot ball response. Alpha, alpha-beta and beta: Like the three grades of gasoline, there are three grades of titanium. Beta-titanium is high-octane supreme. MacGregor uses TVC beta-titanium in the NVG2’s cup face, because its high elongation properties are ideal to generate hot ball response from all points of impact. As long as you make contact, you’re going long. Yes, beta-titanium is expensive. Better materials always are. Quadra Tungsten Weighting Higher MOI. Less twisting. Greater accuracy. Distance technology isn’t much help if it only puts you further OB, which is why the MACTEC NVG2 Driver is equipped with high-density tungsten. Four precision-placed weights keep unwanted rotation of
MacGregor Golf was founded in 1897 and is the second oldest golf company in the United States. They have a long held stake in the game with 59 Majors and 5 club makers having been inducted into the Club Makers Hall of Fame.
The revolutionary Tourney V
Tour professionals make such consistently perfect contact with the ball that there’s an area of wear on their irons that they call the ‘dime spot’.
Because most golfers have more of a ’silver dollar spot’ the technology in the MACGREGOR MACTEC NVG2 Irons creates unmatched distance and forgiveness.
It all starts with Cup Face 360° technology, which creates a high-rebound surface that stretches over the entire clubface for awe-inspiring distance on off-center hits. The hollow body structure that supports this moves weight away from the face for maximum stability and superior forgiveness.
Read the rest of this article »
The MacGregor Bobby Grace V-Foil GT Putter has the highest MOI of any putter available with enhanced visual alignment for unmatched forgiveness and straighter putts.
The high-MOI V-FOIL GT Putter incorporates a deep center of gravity directly in line with the ball plus 150 grams of pure copper weighting in the heel and toe for incredible resistance to twisting.
The 100% milled body has strategic holes in the putter frame to further increase the MOI and stability on off-center hits.
Read the rest of this article »
Keeping mass out of the center and positioning adjustable metal weights on the heel and toe gives the MacGregor Golf Bobby Grace M1 Putter remarkable high stability for blades.
Bobby Grace created three styles in the M-Series for blade aficionados to choose from.
Read the rest of this article »
Almost all drivers have face inserts. But the welds that join the insert to the clubface limit the size of the sweet spot.
Not so with MacGregor MACTEC Driver
Cup Face 360*, because there are no face welds.
Read the rest of this article »